UV-STICK-AX is composed of:
UV-STICK produces direct radiation by UV-C ultraviolet rays. When activated, it generates a strong reduction of microbes in the air and on the irradiated surfaces. For instance, with the model UV-STICK E75H AX, in 2 ÷ 3 seconds a reduction of 99% of bacteria (Bacillus, E. coli, Clostridium, Legionella, Vibrio, Salmonella, Pseudomonas, Staphylococcus, Streptococcus, etc..) is obtained, at the distance of 10 cm.
UV-STICK can be installed in any type of environment, to obtain a deep disinfection of air and surfaces, even those difficult to reach with traditional cleaning systems. The use of this device is allowed only in the absence of personnel; otherwise, the device should be contained within adequately screened boxes or protections. In case of use for the disinfection of work environments, the device must be turned on for 2 ÷ 3 hours during the time of absence of staff workers. For example, by means of a time switch, you can manage the switching-on of the lamps in the hours immediately before the entry of operators, so as to start a new working cycle inside a disinfected environment.
The schedule of the irradiation time can be made by a MASTER-ST series electronic control unit, which can manages several operations, like:
- Programmed switching on. It is possible to program the duration of the irradiation by means of an adjustable timer..
- Personnel entry detector. A safety system switches off the lamps in case of intrusion of personnel.
- Failure alarm. In case of failure of one or more lamps of the device, a warning light will turn on to enable the identification of the lamp/lamps off, and an electric contact will open to signal the failure.
- Hour counter. To manage the correct replacement for exhausted lamps.
UV-STICK...AX device includes a series of UV-C reglette of reduced size and different lengths.
The device is a reglette built entirely in extruded anodized aluminum, IP55 protection and fitted with a reflecting screen in mirror bright aluminum, to increase the power of radiation, through the reflection of UV-C proportion that would otherwise be wasted in the opposite direction to the useful ones.
The extruded aluminum case, contains special electronic ballasts to maximize yield and duration of UV-C lamp.
To avoid flying splinters of glass after the collapse of the UV lamp, a protection of the UV lamp by means of the special thermo-retracted sheath UVLON®-PIPE
(Tetrafluoroethylene), with UV-C transparency >85%. can be provided, always as an option UVLON®-PIPE is a patented system to withstand the wear and tear; it has low adhesion to any product or substance, is resistant to any aggressive chemical at high or low temperatures. It is a polymer conforms to F.D.A. tests for use with foodstuffs.
The constituent materials of UV-STICK...AX allow its use even in harsh operating conditions (high humidity, low temperatures, etc..), or where conditions require a high resistance to chemicals and weathering.
UV-STICK is built with high quality, extremely resistant components, it works perfectly in difficult operative conditions (high Humidity, low temperatures, etc).