List of Products

Applied inside ducts, or in the final section of AHU (Air Handling Unit) UV-DUCT-FL-NX creates an UVGI barrier that inhibits the proliferation of dangerous viruses, bacteria, moulds and spores settling inside Air Conditioning Systems.
UV-DUCT-FL-NX purifies homogeneously the airflow running through its powerful lamps, eliminating the microbial load and the spreading and distribution of hazardous and annoying pathogens inside buildings.
In AC systems an unpleasant biofilm covers usually all inner surfaces as the result of microorganisms combination and favorable conditions for their proliferation, such as temperature changes, high humidity and darkness. UV-DUCT-FL-NX inhibits the creation of this biofilm increasing Indoor Air Quality and comfort.
More specifically, the use of UV-DUCT-FL-NX eliminates important issues related to AC Systems and deadly illnesses (such as Legionella Pneumophila, Tuberculosis, Flu, etc.) but also “Sick Building Syndrome”, “Monday Fever”, Asthma and Allergies. UV-DUCT-FL-NX allows also the control of Hygiene high standards in Food industry and fights against Healthcare Associated Infections (HAI) in hospitals.
UV-DUCT-FL-NX application is important not only for IAQ and health, but a cleaner AC system is also more efficient from an economic point of view, with less operative and maintenance costs. As a matter of fact, using UVGI the need of filters replacement and clean of inner surfaces is less necessary than usual.
With UV-DUCT-FL-NX you obtain a deep and continuous disinfection and cleaning of your AC system, without the use of expensive and polluting chemicals, , in few words with UV-DUCT-FL-NX you have better comfort for people in the building, saving money.

Installed within Air Handling Units (AHU), UV-STICK-SCR inhibits the proliferation of viruses, bacteria, molds, and spores, which are highly harmful to health and tend to accumulate within air conditioning systems.
UV-STICK-SCR is the simplest, most flexible, complete, and efficient system to improve air quality, energy consumption, and maintenance costs in HVAC systems.

UV-STICK-AL-SCR is made of aluminum, with a mirror-reflective parabolic reflector.
UV-STICK-AX-SCR is made of aluminum, with a flat, shiny aluminum reflector.
UV-STICK-NX-SCR is made of stainless steel with a shiny aluminum reflector, optional lamp protection grid ("-NT").

The germicidal power of UV-STICK-SCR keeps the surfaces of the air conditioning system clean, preventing the accumulation of contaminants such as bacteria, pathogenic viruses (Legionella, Tuberculosis, Influenza), and volatile organic compounds (VOCs), responsible for issues like Asthma, Allergies, Sick Building Syndrome, Monday Fever, and Healthcare-Associated Infections (HAI).

The application of UV-STICK-SCR improves indoor air quality, reduces AC system operational and maintenance costs, enhances component and filter efficiency, extends part lifespan, and lowers energy consumption and pressure losses, leading to increased comfort.
 

Applied inside ducts, or in the final section of AHU (Air Handling Unit) UV-RACK creates an UVGI barrier that inhibits the proliferation of viruses, bacteria, moulds and spores settling inside Air Conditioning Systems and very dangerous for health.
UV-RACK purifies homogeneously the airflow running through its powerful lamps, eliminating the microbial load and the spreading and distribution of dangerous and annoying pathogens inside buildings.
in AC systems an unpleasant biofilm covers usually all inner surfaces as the result of microorganisms combination and favorable conditions for their proliferation, such as temperature changes, high humidity and darkness. UV-RACK inhibits the creation of this biofilm increasing Indoor Air Quality and comfort.
More specifically, the use of UV-RACK eliminate important issues related to AC Systems and deadly illnesses (such as Legionella Pneumophila, Tuberculosis, Flu, etc.) but also “Sick Building Syndrome”, “Monday Fever”, Asthma and Allergies. UVRACK allows also the control of Hygiene high standards in Food industry and fights against Healthcare Associated Infections (HAI) in hospitals.
UV-RACK application is important not only for IAQ and health, but a cleaner AC system is also more efficient from an economic point of view, with less operative and maintenance costs. As a matter of fact, using UVGI the need of filters replacement and clean of inner surfaces is less necessary than usual.
With UV-RACK you obtain a deep and continuous disinfection and cleaning of your AC system, without the use of expensive and polluting chemicals, , in few words with UV-RACK you have better comfort for people in the building, saving mone y.

UV-SMELL-SQ, installed inside the hood or ventilation system, significantly helps minimize the unpleasant odors, fats, and pollution generated during cooking in restaurants or industrial kitchens. The fats generated during cooking, complex chains primarily composed of carbon and hydrogen, absorb the intense energy when exposed to UV-C radiation. The molecules become more reactive, as they are in a higher energy state, and recombine with the oxygen in the air, resulting in what is known as "cold combustion." This reaction produces simple, odorless, and gaseous organic compounds, such as carbon dioxide (CO2) and water, which are easily released into the air.
So the air filtered by UVSMELL- SQ during normal cooking, reduces the formation and deposits of fat and the consequent risk of fires, limiting also the growth of molds that feed usually on fats.
UV-SMELL-SQ reduces the need of aspiration system cleaning and maintenance, extend filters’ life but, more importantly, offers the possibility to work safely.
UV-SMELL-SQ uses UV-C lamps and/or UV-C+O3 (Ozone) lamps, and it is the firts device in the market that can handle ozone or ozone-free lamps, alternatively or even combined together, according to clients’ needs.
In these kind of applications, UV power is often enough to reach great results, but ozone, persisting in air for few seconds before turning in simple oxygen, maximizes UV-C performances.

Applied inside ducts, or inside AHU (Air Handling Unit) UV-DUCT-SQ creates an “UVGI section” that inhibits the proliferation of viruses, bacteria, moulds and spores settling inside Air Conditioning Systems, and very dangerous for health.
UV-DUCT-SQ is very versatile and its shape has been designed to adapt quickly to different applications; UV-DUCT-SQ is a modular system that can be mounted by itself or combined with other modules side-by-side, overlapping, etc.; it purifies homogeneously the airflow running through its powerful lamps, eliminating the microbial load and the spreading and distribution of dangerous and annoying pathogens inside buildings.
in AC systems an unpleasant biofilm covers usually all inner surfaces as the result of microorganisms combination and favorable conditions for their proliferation, such as temperature changes, high humidity and darkness. UV-DUCT-SQ inhibits the creation of this biofilm increasing Indoor Air Quality and comfort.
More specifically, the use of UV-DUCT-SQ eliminates important issues related to AC Systems such as deadly illnesses (Legionella Pneumophila, Tuberculosis, Flu, etc.) but also “Sick Building Syndrome”, “Monday Fever”, Asthma and Allergies. UV-DUCT-SQ allows also the control of Hygiene high standards in Food industry and fights against Healthcare Associated Infections (HAI) in hospitals.
UV-DUCT-SQ application is important not only for IAQ and health, but a cleaner AC system is also more efficient from an economic point of view, with less operative and maintenance costs.
As a matter of fact, using UVGI the need of filters replacement and clean of inner surfaces is less necessary than usual.
With UV-DUCT-SQ you obtain a deep and continuous disinfection of your AC system, without the use of expensive and polluting chemicals, , in few words with UV-DUCT-SQ you have better comfort for people in the building, saving money.

Installed inside the humidifier collection tanks (Cooling System) Air Handling Units (A.H.U.) UV-STYLO-E sanitizes the water recirculation system. UV-C treatment in water inhibits the proliferation of viruses, bacteria, moulds, spores, very harmful to health, which commonly proliferate inside Air Conditioning Systems.
UV-STYLO-E has been designed to sanitize water directly within basins, sinks, washing systems (IP67).
Most of the time inside the tank containing the percolating water, which is used to be sprayed in the evaporative panels, there, are sedimentation of mold and algae, and the interior surfaces are covered with an unpleasant biofilm. The most risky case is that there could be also deadly pathogens such as Legionella Pneumophila, for which there are several hundred deaths cases per year.
This happens because the water sprayed inside AC system spreads airborne diseases inside buildings, through infectious particles breathable in air.
UV-STYLO-E avoid also so called “Sick Building Syndrome”, “Monday Fever”, Asthma and Allergies, it allows the control of Hygiene high standards in Food industry and fights against Healthcare Associated Infections (HAI) in hospitals. UV-STYLO-E application is important for not only IAQ and health, but a cleaner AC system is also more efficient from an economic point of view, with less operative and maintenance costs. As a matter of fact, using UVGI the need of filters replacement and clean of inner surfaces is less necessary than usual.
With UV-STYLO-E you obtain a deep and continuous disinfection and cleaning of your AC system, without the use of expensive and polluting chemicals, , in few words with UV-STYLO-E you have better comfort for people in the building, saving money.

UV-WATER is a special UV-C system for water disinfection.
UV-C treatment is ideal for well water disinfection, cistern, or any source that present traces of microbiological pollution (ie. Coliforms, Streptococcus, Escherichia C.) and other microorganisms of various types, like molds, spores , etc.
In addition, it is ideal for water post-treatment, for example downstream active carbon filtration systems. All micro-organisms are eliminated by UV-C irradiation in a safe and rapid way, even Legionella Pneumophila, Giardia, Cryptosporidium, and Pseudomonas Aeruginosa are eliminated completely, despite they are usually complicated to be removed.
UV-C treatment is purely physical, and it allows you to get always the same effect with no harmful by-products, without affecting smell, taste, and water’s pH.
UV-WATER maintains the natural and beneficial characteristics of the treated water as it does not affect the minerals naturally dissolved in it.
UV-WATER is compatible with all other water treatment methods such as filtration, water softening, dechlorination with Activated Carbon.
In some cases, law establishes the use of UV systems as mandatory, especially when water does not have any antimicrobial protection.
Installation is simple and can be performed by a common plumber.
Use and management of the system does not require special skills: the operations of ordinary maintenance and periodic replacement of the UV lamp (recommended every 9000 hours of use) can be performed without difficulty.

UV-STYLO-X system is very simple, versatile and adaptable to different types of applications,  anywhere control is required as for hygiene level in a deep manner owing to an all-round radiation of the surfaces. Applied inside Air Conditioning System, especially in narrow spaces UV-STYLO-X helps to improve Indoor Air Quality (IAQ) eliminating the microbial load and the spreading and distribution of hazardous and annoying pathogens inside buildings. IAQ increases in hotels, offices, patient rooms, schools, etc. and comfort level improvement comes together with less operative costs: a cleaner Air Conditioning System is also more efficient from an economic point of view with better heating, cooling and humidification performances. As a matter of fact, using UVGI the need of mainteinance operations and manual cleaning of inner surfaces is less necessary than usual. With UV-STYLO-X you obtain a deep and continuous disinfection and cleaning of your Air Conditioning System, without the use of expensive and polluting chemicals, , in few words with UV-STYLO-X you have better comfort for people in the building, saving money.

UV-FAN allows deep air disinfection in any type of environment.  Traditional cleaning methods are, often, not sufficient to ensure high levels of hygiene, which can be achieved only by the use of UV-C technology.
The big advantage of this machine is the ability to deal with the air of a room, 24 hours a day, without any contraindication for the staff present. Only a continuous disinfectant action can ensure the security to maintain the microbial load always under control; on the contrary, an intense, but uneven, disinfection results in a fluctuating level of germs present in the environment.
As a matter of fact, environments where food in processed need to be disinfected to keep high hygiene and quality standards, typical of this sector. With UV-FAN, it is possible to achieve disinfection of production, packaging, storage areas, etc. in a simple, immediate and safe way, without developing heat, without the use of liquids and chemicals and without any contraindications.  
Conveyed by a silent built-in fan, the air in the room passes through the germicidal chamber of the purifier to be decontaminated from microbes, but also from chemical contaminants; in addition to the UV-C lamps, UV-FAN also contains an innovative Titan dioxide nano-particle filter TIOX ® with silver salts, which enhances the germicidal action of ultraviolet effect.
UV-FAN achieves the elimination (99%) of bacteria such as Bacillus, Coli, Clostridium, Legionella, Vibrio, Salmonella, Pseudomonas, Staphylococcus, etc. in just a few minutes of operation, its efficacy is also active against the virus causing COVID-19 possible spread.  
Germicidal efficiency is certified by accredited laboratories (SINAL) by the Ministry of Health and the Institute of Hygiene at the University of Siena (the abatement of 3 logs of the T.M.C. has been certified).

UV-STICK allows for deep disinfection of air and surfaces in any type of food environment. Traditional cleaning methods are often not sufficient to ensure high hygiene levels, which can only be achieved through the use of UV-C technology.
With UV-STICK, it is possible to achieve high levels of disinfection in a simple, immediate, and safe manner, without generating heat, without the use of liquids, and with no side effects, to maintain high hygiene and quality standards.
The device is installed like a regular ceiling-mounted light fixture and can be turned on during work breaks, always in the absence of personnel, to irradiate surfaces, which are then disinfected. In the environment, the natural circulation of air currents also allows for air treatment, which, purified of microbial load, creates an ideal and healthy environment.

UV-STICK-AL is made of aluminum, with an internal parabolic reflector in mirrored aluminum.
UV-STICK-AX is made of aluminum, with a flat internal reflector in mirrored aluminum.
UV-STICK-NX is made of stainless steel, with a flat internal reflector in mirrored aluminum. Also available in -UL version.

The disinfection level with UV-STICK achieves a reduction (99%) of bacteria such as Bacillus, Coli, Clostridium, Legionella, Vibrio, Salmonella, Pseudomonas, Staphylococcus, etc., in just a few minutes of operation.
 

UV-STYLO-S, installed inside the hood or ventilation system, significantly helps minimize the unpleasant odors, fats, and pollution generated during cooking in restaurants or industrial kitchens. The fats generated during cooking, complex chains primarily composed of carbon and hydrogen, absorb the intense energy when exposed to UV-C radiation. The molecules become more reactive, as they are in a higher energy state, and recombine with the oxygen in the air, resulting in what is known as "cold combustion." This reaction produces simple, odorless, and gaseous organic compounds, such as carbon dioxide (CO2) and water, which are easily released into the air.
So the air filtered by UV-STYLO-S during normal cooking, reduces the formation and deposits of fat and the consequent risk of fires, limiting also the growth of molds that feed usually on fats.
UV-STYLO-S reduces the need of aspiration system cleaning and maintenance, extend filters’ life but, more importantly, offers the possibility to work safely.
UV-STYLO-S uses UV-C lamps and/or UV-C+O3 (Ozone) lamps, and it is the firts device in the market that can handle ozone or ozone-free lamps, alternatively or even combined together, according to clients’ needs.
In these kind of applications, UV power is often enough to reach great results, but ozone, persisting in air for few seconds before turning in simple oxygen, maximizes UV-C performances.

UV-BOX is equipped with automatic shut-off system of lamps, in case of opening of the door. The management of the turning on is carried out via the top panel, which allows to set the automatic timed switch-on, by means of the switch and the timer. The lamps are lit every time the door is closed and the treatment continues for the operation time set; between a disinfection cycle and the other one, it is possible to set the “pause” time, depending on needs, after which the lamps will turn back on automatically for a new disinfection cycle to maintain sterility for a long time. UV-BOX is entirely manufactured in Italy, with high quality and extremely resistant materials. The box is equipped with two UV-C lamps, installed in opposite positions, one on the top and on the bottom, in order to radiate all surfaces to be disinfected and without any shadows. Moreover, the internal reflection increases the irradiation power, managing to significantly lower the exposure time required to achieve the disinfection level of 99.9%. The use of the UV-BOX is recommended when it is required to preserve the sterility of the tools, even hours after washing, so that they can be used safely during operations. It is shown how, in the food industry, an increased in hygiene level allows a consequent and general product quality increase and, more specifically, the storage of materials inside the UV-BOX achieves the elimination (99%) of bacteria such as Bacillus, E. Coli, Clostridium, Legionella, Vibrio, Salmonella, Pseudomonas, Staphylococcus, etc. in just 4 minutes of operation. High disinfection levels of UV-BOX can be otherwise achieved only with chemicals, hazardous to health and harmful to the environment, as well as costly.

UV-REFLEX-SCB performs a progressive action of decontamination from airborne bacteria and mold present in the air of the cold rooms, improving the conditions of preservation of products.
With the use of UV-REFLEX-SCB, in particular, an improved maturation, aspect and quality of the meat is achieved. The treatment takes place by exploiting the constant forced air circulation, (due to the flow generated by the fan of the ventilation system), which pass next to the device and is decontaminated from microbes, before they enter into contact with the products inside the cold rooms.
The device does not affect the normal aging of the product, as it avoid only the growth of unwanted microorganisms, i.e. those found in the air.
UV-REFLEX-SCB can stay on continuously without any problem, so it ensures a level of microbial load always under constant control without the ups and downs, typical of traditional disinfection systems.
Owing to the use of the UV-C technology, it is possible to increase the shelf life of food preserved in cold rooms, without developing resistant microorganisms and without the use of chemicals, risky to employ and hard to biodegrade. UV-C treatment is dry and cold, does not alter the organoleptic features of food and its quality, but rather, it prevents product loss due to the proliferation of bacteria and fungi and enhances the freshness, taste and appearance of food, without dehydration and weight loss.
It is shown how, in the food industry, on increased level of hygiene allows a consequent and general increase of product quality.
UV-REFLEX-SCB achieves the elimination (99%) of bacteria such as Bacillus, Coli, Clostridium, Legionella, Vibrio, Salmonella, Pseudomonas, Staphylococcus, etc. in just a few minutes of operation.

UV-TEAM range is applied on food products transport and packaging lines such as: flow pack, termoforming machines, sieves, cooling tunnel, automatic weighing and more in general transport belts, as well as treating also the food products, decontaminating from germs the surfaces of belts, products, packages, etc.It is shown that the control and the increase of hygiene level allows a consequent and general increase in quality both in healthcare facilities but also in pharmaceutical sector, in microbiological laboratories, etc.The disinfection level with UV-TEAM achieves the elimination (99%) of bacteria such as Bacillus, Coli, Clostridium, Legionella, Vibrio, Salmonella, Pseudomonas, Staphylococcus, etc. in just a few minutes of operation.  Some application examples are the treatment of dried fruit in vibrant surfaces (strong reductions of molds), treatment of bakery products with tapes to stainless mesh (360° coverage of the surface, increase of shelf-life starting from 150%); treatment of fresh pasta in the cooling tunnel, in cascade on the belts multistorey (average increase of the life of the packaged product from a minimum of 20 to 60 days.); treatment in bottling lines and the down channel plugs (sanitization in very short times, with lamps I and amalgam); treatment of products being placed on the clean room (using a UV tunnel that allows you to enter products in protected environments by eliminating any risk of contamination) treatment of spices (tunnel with Shaving system thin layer, reduction of the bacterial load and increase the shelf-life. High disinfection levels of UV-TEAM can be otherwise achieved, but only with chemicals, hazardous to health and harmful to the environment, as well as costly.

UV-BOX-E2/40H-NX-T preserves the hygiene of tools, containers and of any type of equipment in the food sector.  As a matter of fact, commonly used objects in food processing have the need to be disinfected to mantain high hygiene and quality standards, typical of this sector.  With UV-BOX-E2/40H-NX-T, it is possible to perform the disinfection of equipment and tools in a simple, immediate and safe way, without developing heat, without using liquids and without any contraindications.

The box is equipped with two UV-C lamps, installed in opposite positions, one on the top and one on the bottom, in order to radiate all surfaces to be disinfected and without any shadows. Moreover, the internal reflection increases the irradiation power, managing to significantly lower the exposure time required to achieve the disinfection level of 99.9%.

The use of the UV-BOX-E2/40H-NX-T is indicated when it is required to preserve the sterility of the tools, even hours after washing, so that they can be used safely during operations.
It is shown that the control and the increase of hygiene level allows a consequent and general increase in quality both in healthcare facilities but also in pharmaceutical sector, in microbiological laboratories, etc.

The disinfection level with UV-BOX-E2/40H-NX-T achieves the elimination (99%) of bacteria such as Bacillus, Coli, Clostridium, Legionella, Vibrio, Salmonella, Pseudomonas, Staphylococcus, etc. in just a few minutes of operation. High disinfection levels of UV-BOX-E2/40H-NX-T can be otherwise achieved, but only with chemicals, hazardous to health and harmful to the environment, as well as costly.

UV-CABINET preserves the hygiene of tools, containers and of any type of equipment in the food sector.  As a matter of fact, commonly used objects in food processing have the need to be disinfected to mantain high hygiene and quality standards, typical of this sector. With UV-CABINET, it is possible to perform the disinfection of equipment and tools in a simple, immediate and safe way, without developing heat, without using liquids and without any contraindications.  The cabinet is equipped with different UV-C lamps, positioned uniformly in order to radiate all surfaces to be disinfected and without any shadows. Moreover, the internal reflection increases the irradiation power, managing to significantly lower the exposure time required to achieve the disinfection level of 99.9%. The use of the UV-CABINET is indicated when it is required to preserve the sterility of the tools, even hours after washing, so that they can be used safely during operations. It is shown how, in the food industry, an increased in hygiene level allows a consequent and general product quality increase and, more specifically, the storage of materials inside the UV-CABINET achieves the elimination (99%) of bacteria such as Bacillus, E. Coli, Clostridium, Legionella, Vibrio, Salmonella, Pseudomonas, Staphylococcus, etc. in just 4 minutes of operation.  High disinfection levels of UV-CABINET can be otherwise achieved only with chemicals, hazardous to health and harmful to the environment, as well as costly.

The UV-FCU-CL air disinfection system can be applied for air disinfection in fancoils and air handling units. (U.T.A).
For installation on FANCOIL it is sufficient to fix the supplied clips in the space between the fan and the heating/cooling battery; the lamp is inserted between the above sections and locked with the clips. Installation is simple and it is also possible to use it on already installed and working fan coils (re-trofit technology on already existing systems). The supplied electronic power supply unit, which is small in size, is supplied with a plug/socket connection system that simplifies lamp replacement.
For the sanitization of the air and the radiant batteries in the air treatment units (A.T.U.) the UV-FCU-CL device directly radiates, with UV-C rays, air filters and cooling and/or humidification batteries inside the A.T.U., to avoid the formation and growth of microorganisms potentially harmful to people’s health. The use of the UV-FCU-CL represents an economical and reliable solution to stop the access of microbes to social rooms or to controlled contamination chambers, through a simple installation that is safe for the personnel, since everything is limited to an irradiation inside the AHU ducts, allowing a considerable saving in management costs and health protection from infectious diseases such as:
1) Sick Building Syndrome;
2) Legionnaires’ disease (Legionella Pneumophila - typhus of legionnaires); 
3). Tuberculosis (Mycobacterium Tub.)
4) Monday or humidifier fever.

UV-SMELL-A, installed inside the hood or ventilation system, significantly helps minimize the unpleasant odors, fats, and pollution generated during cooking in restaurants or industrial kitchens. The fats generated during cooking, complex chains primarily composed of carbon and hydrogen, absorb the intense energy when exposed to UV-C radiation. The molecules become more reactive, as they are in a higher energy state, and recombine with the oxygen in the air, resulting in what is known as "cold combustion." This reaction produces simple, odorless, and gaseous organic compounds, such as carbon dioxide (CO2) and water, which are easily released into the air. This process causes a particular and immediate chemical reaction, the “cold combustion”.

Results of this reaction are organic and odorless short chain gases, such as carbon dioxide (CO2), water, etc.., normally present in air. So the air filtered by UV-SMELL-A during normal cooking, reduces the formation and deposits of fat and the consequent risk of fires, limiting also the growth of molds that feed usually on fats. UV-SMELL-A reduces the need of aspiration system cleaning and maintenance, extend filters’ life but, more importantly,  offers the possibility to work safely.

UV-SMELL-A uses a UV-C amalgam lamp + O3 (Ozone) lamps.This type of bulbs, unlike the standard low pressure UV-C lamps, use a special “amalgam” made with metals, which optimize the UV germicidal power efficiency. Amalgam systems allows triple the UV-C emission compare to a low pressure lamp with the same length, and up to 16.000 hours life that guarantee a consequent cost saving. Furthermore the Ozone, persisting in air for few seconds before turning in simple oxygen, maximizes UV-C performances.

The UV-STYLO-NX can be installed in places where space is very limited, for example for the disinfection of packaging film, conveyors, bottling lines and turntables for disinfection of bottles and their closing capsules, as well as the treatment of the same food products, for decontamination from germs of the surfaces of the conveyor belts, of the products, of the packaging, etc.
Traditional cleaning methods are, often, not sufficient to ensure high levels of hygiene, which can be achieved only by the use of UV-C technology.
As a matter of fact, food processes have the need to be controlled, by monitoring hygiene levels, to keep quality standards, typical of this sector, high.
It is shown how, in the food industry, the increase in hygiene level allows a consequent and general product quality increase and, more specifically, UV-STYLO-NX achieves the abatement (99%) of bacteria such as Bacillus, Coli, Clostridium, Legionella, Vibrio, Salmonella, Pseudomonas, Staphylococcus, etc. in just 4 minutes of operation.
High disinfection levels of UV-STYLO can be otherwise achieved and only with the use of chemicals, hazardous to health and harmful to the environment, as well as costly.

UV-DIRECT allows for deep disinfection of air and surfaces in any type of environment. Traditional cleaning methods are often not sufficient to ensure high hygiene levels, which can only be achieved through the use of UV-C technology.
With UV-DIRECT, it is possible to obtain high levels of disinfection in a simple, immediate, and safe way, without generating heat, without the use of liquids, and without any side effects, to maintain high hygiene and quality standards.
The device can be turned on during work breaks, always in the absence of personnel, to irradiate surfaces, which are then disinfected. In the environment, the natural circulation of air currents also allows for air treatment, which, purified of microbial load, creates an ideal and healthy environment.

UV-DIRECT-H-NX is equipped with a UV-C lamp and can be installed as a regular ceiling-mounted light fixture.
UV-DIRECT-K-NX is equipped with a UV-C lamp and is intended to be recessed into a false ceiling.

The disinfection level with UV-DIRECT achieves a reduction (99%) of bacteria such as Bacillus, Coli, Clostridium, Legionella, Vibrio, Salmonella, Pseudomonas, Staphylococcus, etc., in just a few minutes of operation.

UV-TEAM-A range is applied on food products transport and packaging lines such as: flow pack, termoforming machines, sieves, cooling tunnel, automatic weighing and more in general transport belts, as well as treating also the food products, decontaminating from germs the surfaces of belts, products, packages, etc.
It is shown that the control and the increase of hygiene level allows a consequent and general increase in quality both in healthcare facilities but also in pharmaceutical sector, in microbiological laboratories, etc.
The disinfection level with UV-TEAM-A achieves the elimination (99%) of bacteria such as Bacillus, Coli, Clostridium, Legionella, Vibrio, Salmonella, Pseudomonas, Staphylococcus, etc. in just a few minutes
of operation.
Some application examples are treatment in bottling lines and the down channel plugs; treatment of products being placed on the clean room (using a UV tunnel that allows you to enter products in protected environments by eliminating any risk of contamination) treatment of spices (tunnel with Shaving system thin layer, reduction of the bacterial load and increase the shelf-life.
The - A serie includes special amalgam lamps. This type of bulbs, unlike the standard low pressure UV-C lamps, use a special “amalgam” made with metals, which optimize the UV germicidal power efficiency.
Amalgam systems allows triple the UV-C emission compare to a low pressure lamp with the same length, and up to 16.000 hours life that
guarantee a consequent cost saving.
Amalgam lamps are perfect in application where there is a short timing of exposition, such as in some food packaging lines.
High disinfection levels of UV-TEAM can be otherwise achieved, but only with chemicals, hazardous to health and harmful to the environment, as well as costly.

UV-STYLO-F system is very simple, versatile and adaptable to different types of applications, from conveyor belts to silos, containers, food storage in general, and anywhere control is required as for hygiene level in a deep manner owing to an all-round radiation of the surfaces.
UV-STYLO-F is designed specifically for applications in the food industry, and that is why one of its features is also the IP67 protection level, allowing it to combine perfectly with damp environments and water splashes.
Traditional cleaning methods are, often, not sufficient to ensure high levels of hygiene, which can be achieved only by the use of UV-C technology.
As a matter of fact, food processes and storage have the need to be kept under control, by monitoring hygiene levels, to increase quality standards, which are usually very high.
It is shown how, in the food industry, an increased hygiene level allows a consequent and general product quality improvement. UV-STYLO-F achieves the elimination (99%) of bacteria such as Bacillus, Coli, Clostridium, Legionella, Vibrio, Salmonella, Pseudomonas, Staphylococcus, etc. in just a few minutes of operation.
High disinfection levels of UV-STYLO-F can be otherwise achieved but only with a massive use of chemicals, hazardous to health and harmful to the environment, as well as costly.

UV-TEAM-A-4P range is applied on food products transport and packaging lines such as: flow pack, termoforming machines, sieves, cooling tunnel, automatic weighing and more in general transport belts, as well as treating also the food products, decontaminating from germs the surfaces of belts, products, packages, etc.
It is shown that the control and the increase of hygiene level allows a consequent and general increase in quality both in healthcare facilities but also in pharmaceutical sector, in microbiological laboratories, etc.
The disinfection level with UV-TEAM-A-4P achieves the elimination (99%) of bacteria such as Bacillus, Coli, Clostridium, Legionella, Vibrio, Salmonella, Pseudomonas, Staphylococcus, etc. in just a few seconds of treatment.
Some application examples are treatment in bottling lines and the down channel plugs; treatment of products being placed on the clean room (using a UV tunnel that allows you to enter products in protected environments by eliminating any risk of contamination) treatment of spices (tunnel with Shaving system thin layer, reduction of the bacterial load and increase the shelf-life).
The UV-TEAM-A series includes special amalgam lamps. This type of bulbs, unlike the standard low pressure UV-C lamps, use a special “amalgam” made with metals, which optimize the UV germicidal power efficiency. Amalgam systems allows triple the UV-C emission compare to a low pressure lamp with the same length, and up to 18.000 hours life that guarantee a consequent cost saving.
Amalgam lamps are perfect in application where there is a short timing of exposition, such as in some food packaging lines.
High disinfection levels of UV-TEAM-A-4P can be otherwise achieved, but only with chemicals, hazardous to health and harmful to the environment, as well as costly.

Designed to provide continuous high quality UV air decontamination in any kind of environment, UV-FAN-XS main features are:

• Steel body painted with epoxy powders or AISI 304 stainless steel (model ...-NX ).
• Selective UV-C lamp (at 253.7 nm.) with high efficiency and high UVC power, ozone-free for use in the presence of people 24/7
• Internal germicidal chamber made of ultra-pure mirror bright special aluminium with high UV-C 253.7nm reflectivity 
• 24/7 Treatment continuity: use in the presence of people. ISO 15858 standard for safety of devices with UV-C lamps. 
• Special photocatalytic titanium dioxide TiOx® technology (Registered Trademark of Light Progress Srl) for the elimination of organic and inorganic pollutants VOCs and NOXs.
• Complies with ISO 15714 standard that certifies the UV-C dose emitted and required to perform disinfection.
• Meets the noise standards of Directive 2006/42/EC <36db at 1mt
• Wall installation, floor installation kit available
• Porthole for visual inspection of the lamps, transparent to visible light but preventing the passage of UV-C rays 
• Long cable with plug (2mt)
• Safety microswitch: that switches off the lamps if the cover is opened and lamp exposed, to perform maintenance in safety.
• CE marking (LVD 73/23 - EMC 89/336 - MD 93/42), ISO 60335-1-2
• Power supply with specific electronic ballast for UV-C lamps
• All materials used are tested to withstand intense UV-C radiation.
• Suitable for installation in class 1 - protected areas.

The UV-FLOW-WL is a controlled unidirectional flow device with a 180° beam pattern; the powerful UV lamp inside is provided in 2 different power models, each with a narrow emission peak at wavelength of 253.7nm. (nanometers), which has a strong germicidal effect against all micro-organisms (molds, bacteria and viruses).
There is also a parabolic, mirror bright aluminum surface, which generates UV rays parallel beams by reflection. These beams pass through a special black laminated grid that directs UV rays to form a unidirectional flow ("blade UV"). When installed according to the instructions, this device can be used in the presence of people for intensive and continuous air disinfection.
TheUV-FLOW-WL must be anchored at wall, at a fixed minimum height (see technical specification for details) from the floor to generate a special horizontal flow that will create a "zone of intense radiation" below the ceiling, which destroys all airborne microorganisms, due to natural convection of air.
The air, rich in microbes, is continuously treated and disinfected by the ultraviolet rays; a progressive decontamination of bacteria, viruses and molds is made, decreasing the possibility of bacterial, viral transmissions and contaminations in general.
Continuous operation ensures a permanent progressive healthy environment, especially in hospitals, schools, restaurants, indoor workplaces as offices, laboratories, etc..An extremely important disinfection activity  can be done in hospitals intensive cares units, to prevent the spread of diseases such as TB and other transmissible pathologies through air.

UV-PENTALIGHT is a five-lamp germicidal device (360 degrees of direct UV) with a remote control, occupation sensor, control bar for easy mobility.
Operated through a remote control or dedicated control unit, equipped with a digital interface to manage ignition delay and treatment duration.
Automatic Safety Switch to avoid accidental exposure to people during UV-C disinfection.
Tested microbial reduction up-to Log6 with a 10 minutes treatment against Escherichia c., Salmonella T., Pseudomonas A., Staphylococco A., Klebsiella PN.

Portable Disinfection, five lamps, five wheels, digital controls, and one power cable ready for you to connect and disinfect large areas.
Optimized Performance, with Light Progress High-Output UV-C lamps (253,7 nm) and internal mirror bright aluminum reflectors.
Built to Last, with high-quality UV-Safe materials and robust control bar, body, and wheels.
Trusted Durability, IP55 Rating, available  UVLON™ to capture broken glass and protect against temperature fluctuations, and four-sensor motion alarm.
Simple to Use, Digital interface manages switching ON, delays and treatment duration.
Easy to Maintain, the built-in hour counter let’s you know exactly when to replace lamps. No other maintenance is required.
Remote Control, to operate the device outside the target area for treatment

UV-FLOW-WH is a controlled unidirectional flow device, with a powerful UV lamp inside and a narrow emission peak at wavelength of 253.7 nm. (nanometers), which has a strong germicidal effect against all micro-organisms (molds, bacteria and viruses).
There is also a parabolic, mirror bright aluminum surface, which generates UV rays parallel beams by reflection. These beams pass through a black honeycomb laminated grid that directs UV rays to form a unidirectional flow ("blade UV"). When installed according to the instructions, this device can be used in the presence of people for intensive and continuous air disinfection.

The UV-FLOW .... CL is a controlled multidirectional flow device, with four powerful UV lamps inside and a narrow emission peak at wavelength of 253.7 nm. (nanometers), which has a strong germicidal effect against all micro-organisms (molds, bacteria and viruses).
There is also a parabolic, mirror bright aluminum surface, which generates UV rays parallel beams by reflection. These beams pass through a special black laminated grid that directs UV rays to form a unidirectional flow ("blade UV"). When installed according to the instructions, this device can be used in the presence of people for intensive and continuous air disinfection.
The UV-FLOW .... CL must be anchored to the ceiling to generate a special horizontal flow that will create a "zone of intense radiation" below the ceiling, which destroys all airborne microorganisms, due to natural convection of air.
The air, rich in microbes, is continuously treated and disinfected by the ultraviolet rays; a progressive decontamination of bacteria, viruses and molds is made, decreasing the possibility of bacterial, viral transmissions and contaminations in general.
Continuous operation ensures a permanent progressive healthy environment, especially in hospitals, schools, restaurants, indoor workplaces as offices, laboratories, etc..An extremely important disinfection activity  can be done in hospitals intensive cares units, to prevent the spread of diseases such as TB and other transmissible pathologies through air.
 

UV-STICK-ST-NX allows for deep disinfection of air and surfaces in all types of food environments. Traditional cleaning methods are often insufficient to ensure high hygiene levels, which can only be achieved through the use of UV-C technology.
With UV-STICK, it is possible to achieve high levels of disinfection in a simple, immediate, and safe manner, without generating heat, using no liquids, and with no contraindications, thus maintaining high hygienic and quality standards.

The mobile device on wheels can be activated during work breaks, always in the absence of personnel, to irradiate the surfaces, which are then disinfected. In the environment, the natural air circulation also allows for air treatment, purifying it from microbial load and creating an ideal and healthy environment.

UV-STICK-ST-NX is made of stainless steel, with a double lamp and an internal reflective surface in mirrored aluminum.

The disinfection level with UV-STICK achieves a reduction (99%) of bacteria such as Bacillus, Coli, Clostridium, Legionella, Vibrio, Salmonella, Pseudomonas, Staphylococcus, etc., within just a few minutes of operation.

The UV-PIPE family is a line of innovative devices designed to ensure high hygiene and safety standards in food environments. Using UV-C technology, UV-PIPE products are ideal for purifying air and surfaces exposed to microbial contamination, effectively reducing the presence of bacteria, fungi, molds, and other microorganisms responsible for food deterioration. Cross-contamination between food products is one of the main issues in the food industry, and UV-C disinfection is the perfect solution to combat it safely, quickly, and ecologically.

UV-PIPE-BV: Specifically designed for food store display counters. It treats the circulating refrigerated air, preventing cross-contamination of food.
UV-PIPE-F with flange: Ideal for applications where 360° surface irradiation and distributed disinfection are required.
UV-PIPE-NX: Features an ultra-compact AISI 304 stainless steel structure, coated with reflective VEGA™ aluminum, designed for high UV reflection.

It is well-established that, in the food industry, increasing hygiene levels leads to a general improvement in product quality. More specifically, UV-PIPE achieves a 99% reduction of bacteria such as Bacillus, Coli, Clostridium, Legionella, Vibrio, Salmonella, Pseudomonas, Staphylococcus, etc., in just a few seconds of operation.